Skip to content
Hobbies. Collectibles. Gifts. A good find starts here.
LootBanditGood things. Worth finding.

Tools & PartsK&S Precision Metals

K&S Precision Metals 5MM TAP – 469

View retailer options LootBandit and Muncle Mikes share ownership.
K&S Precision Metals 5MM TAP – 469

K&S Precision Metals 469 is a 5 mm metric threading tap for cutting or restoring internal threads in a properly prepared hole. A tap works inside a hole; it is not a 5 mm drill bit or a die for cutting threads on the outside of a rod. K&S describes its precision tapping tools as made from tungsten steel. For the original product identity, see the matching K&S 469 listing at Muncle Mikes. Retailer link; LootBandit and Muncle Mikes share ownership.

What is K&S 469?

DetailVerified identification
ManufacturerK&S Precision Metals
Item number469 (Muncle Mikes SKU K+S469)
Tool typeMetric threading tap; cuts internal threads
Nominal thread diameter5 mm (manufacturer/dealer size designation)
Retailer-described packageOne tap; no complete tool kit established
Thread pitchNot independently verified for this exact SKU; confirm before selecting a mating fastener or drill size

Choosing a tap for a model-building project

This item is relevant when a miniature mechanism, metal fitting or scratch-built part needs a small internal thread. Match the required thread diameter and pitch to the intended screw or stud; the phrase “5 mm tap” alone does not confirm the precise pitch or the correct pilot-drill diameter. Check the tap’s marking and the workpiece material before cutting. Support the work securely and use an appropriate tap handle; incorrect alignment, oversized or undersized pilot holes and excessive force can damage small tools or parts.

A tap cuts the female thread inside a hole. A threading die cuts the male thread around a rod or fastener. K&S 420 is sold separately as a die holder; it is not a substitute for a tap handle. Do not assume the 469 tap fits a given handle or workpiece without checking the shank, thread pitch and required cutting conditions.

Questions about K&S 469

Does the 5 mm marking tell me what drill to use?

No. Five millimeters is the nominal thread size, not a pilot-hole instruction. Confirm the exact pitch and the correct tapping-drill specification for the material before drilling.

Does it include a holder or dies?

Exact-item dealer listings describe a single 469 tap. A tap handle or matching threading die has not been verified as included; check the current retailer package details before ordering.

Can this make external threads?

No. For external threads, choose a die of the correct size and pitch with a compatible die holder.

Evidence: K&S Precision Metals — Precision Threading Tap (tool purpose, tungsten-steel description and size range); item 469/5 mm and one-piece identity cross-checked against the exact-item K&S 469 listing at Model Engines Australia, October 28, 2026. Manufacturer/dealer specifications are distinguished from the practical selection advice above. The precise pitch, current Muncle Mikes package accessories and original product-photo usage rights remain unverified.

Plan tools and supplies for a hobby project

LootBandit community

Customer reviews

No LB reviews yet. Share your experience or tell other hobbyists what you found useful.

Write a review

Reviews are submitted by readers and checked by LootBandit before they appear. LB does not currently verify purchases.