K&S Precision Metals 469 is a 5 mm metric threading tap for cutting or restoring internal threads in a properly prepared hole. A tap works inside a hole; it is not a 5 mm drill bit or a die for cutting threads on the outside of a rod. K&S describes its precision tapping tools as made from tungsten steel. For the original product identity, see the matching K&S 469 listing at Muncle Mikes. Retailer link; LootBandit and Muncle Mikes share ownership.
What is K&S 469?
| Detail | Verified identification |
|---|---|
| Manufacturer | K&S Precision Metals |
| Item number | 469 (Muncle Mikes SKU K+S469) |
| Tool type | Metric threading tap; cuts internal threads |
| Nominal thread diameter | 5 mm (manufacturer/dealer size designation) |
| Retailer-described package | One tap; no complete tool kit established |
| Thread pitch | Not independently verified for this exact SKU; confirm before selecting a mating fastener or drill size |
Choosing a tap for a model-building project
This item is relevant when a miniature mechanism, metal fitting or scratch-built part needs a small internal thread. Match the required thread diameter and pitch to the intended screw or stud; the phrase “5 mm tap” alone does not confirm the precise pitch or the correct pilot-drill diameter. Check the tap’s marking and the workpiece material before cutting. Support the work securely and use an appropriate tap handle; incorrect alignment, oversized or undersized pilot holes and excessive force can damage small tools or parts.
A tap cuts the female thread inside a hole. A threading die cuts the male thread around a rod or fastener. K&S 420 is sold separately as a die holder; it is not a substitute for a tap handle. Do not assume the 469 tap fits a given handle or workpiece without checking the shank, thread pitch and required cutting conditions.
Questions about K&S 469
Does the 5 mm marking tell me what drill to use?
No. Five millimeters is the nominal thread size, not a pilot-hole instruction. Confirm the exact pitch and the correct tapping-drill specification for the material before drilling.
Does it include a holder or dies?
Exact-item dealer listings describe a single 469 tap. A tap handle or matching threading die has not been verified as included; check the current retailer package details before ordering.
Can this make external threads?
No. For external threads, choose a die of the correct size and pitch with a compatible die holder.
Evidence: K&S Precision Metals — Precision Threading Tap (tool purpose, tungsten-steel description and size range); item 469/5 mm and one-piece identity cross-checked against the exact-item K&S 469 listing at Model Engines Australia, October 28, 2026. Manufacturer/dealer specifications are distinguished from the practical selection advice above. The precise pitch, current Muncle Mikes package accessories and original product-photo usage rights remain unverified.