K&S Precision Metals 420 is a threading-die holder, also called a die-stock handle. Its purpose is to hold a separately selected threading die while that die cuts or restores threads on the outside of a suitable rod or other cylindrical workpiece. It is a hand tool, not the cutting die itself, a tap for internal threads or a complete threading set. See the exact K&S 420 listing at Muncle Mikes (sponsored retailer link; LootBandit and Muncle Mikes share ownership).
K&S 420 identification
| Detail | What is supported |
|---|---|
| Manufacturer | K&S Precision Metals |
| Item number | 420 (Muncle Mikes SKU K+S420) |
| Product type | Threading-die stock handle / holder for external-thread cutting |
| Retention | Dealer catalogue description identifies a setscrew for retaining the die |
| Package identity | Exact-item listings describe one die handle; the cutting die is a separate product |
| Compatible die sizes | Not established for every brand or die format; confirm the outside diameter and thickness of your die before ordering |
How to decide whether this holder fits your project
Choose the cutting die first: match its thread diameter and pitch to the rod and mating fastener. Then verify that the die’s outside dimensions fit the K&S 420 holder and that its retaining screw can secure it as intended. A common thread size does not establish that two different die bodies fit the same holder. Keep the workpiece secure and straight; follow the die maker’s recommendations for cutting and clearing chips. Do not assume this handle supplies a die, lubricant or drill.
This tool is distinct from the K&S 469 5 mm tap. A tap cuts threads inside a hole and needs a suitable tap handle; the 420 die holder is for a die cutting threads outside a rod. Neither is a substitute for the other. For model railroading, scratch-building or miniature machinery, check the actual material, rod size and intended joint before choosing the threading system.
Frequently asked questions
Does K&S 420 cut threads by itself?
No. The holder supplies leverage and retains a matching threading die, which performs the cutting. Select the die separately and verify its physical fit.
Is this the tool for tapping a hole?
No. Tapping a hole creates internal threads and requires a tap with a compatible tap handle. This 420 handle holds an external-thread die.
Will any 5 mm die fit?
Not necessarily. A die’s thread size and its outer body size are different specifications. Confirm its outside dimensions against the holder, and verify the desired thread pitch separately.
Sources checked October 28, 2026: K&S threading-tool stock-number table and holder description reproduced by RC Model Aircraft (item 420 as die-stock handle, with die-retention setscrew); independent exact-item dealer listings at Model Engines Australia and Ultimate Hobbies (one handle, item 420). The precise die-body capacity, in-package extras, current individual-item photograph identity and LootBandit use rights are unverified, not assumed. Selection guidance is editorial, not a claim of firsthand testing.